Monday, June 29, 2009

NEW NAVY OF THE "AERIAL OCEAN"

Sail to Steam
Wood to Ironclads
Dreadnaughts to Carriers

Carriers to ?????

Consider the magic of Carbon. Building a ship or aircraft out of carbon results in more structural strength than the metals of the past. Building an aircraft or ship out of carbon gives it a natural "sink" that absorbs electromagnetic radiation; making the aircraft or ship more "stealthy" than before. Shaping a carbon constructed ship or aircraft can cause it to reflect radar away from the emitter; again, more stealthy than before. This is, after all, much of the premise behind the B-2 Bomber, or Sea Shadow ship.

Now, enlarge the vision. Hearken back to the giant dirigibles of the 1930's...constructed then out of aluminum and canvas. Substitute Carbon for those materials. As carbon is almost half the weight of aluminum, and several times stronger than steel of the same weight, it would be possible to re-create those giant airships of the past, in exact dimensions as before, but using the new carbon materials; end up with craft that weighed almost half; thereby increasing their payload by that much; and, making them stronger as well.

Consider a new type of Navy; one that can take full advantage of the "Aerial Ocean".; one comprised of flying ships. From small craft carrying a dozen crew members, or giant flying aircraft carriers carrying new UCAV aircraft.

Ships that can fly overland; without worrying about "draft" or shorelines, or ice. Ships that simply float in the air; that can hover, or land and take off straight up and down like a helicopter.
Ships that can land in the water, or land on any unprepareed empty field.

Ships without range limits, or re-fueling needs. As airships are by their nature, very large, they can carry large arrays of solar cells. Coupling these with other forms of power generation such as fuel cells or similar technologies; it is possible to create ships that fly without need of any fuel

Airships can carry immense payloads; these can be configured in almost any form of defensive or offensive manner wanted.

An "Aerial Ocean" Navy, more versatile than the past.......no longer limited to the water.

Thursday, June 25, 2009



NO BLIMPS!

This blog is meant to promote the use of AIRSHIPS for the military. These are not the blimps or zeppelin type of craft that most are familiar with.

"HOW DOES THE TURTLE AIRSHIP WORK?"


The Turtle airship is a true lighter-than-air craft.


Although the Turtle airship has a lifting body shape, it is not a hybrid airship. The airship can operate using only aerostatic lift supplied though negative bouyancy. Additional, supplemental aerodynamic force is derived from the shape of the airship The overall shape of the airship is a broad helipsoid.
The airship has an internal framing system of carbon fibre trusses and matrix. The entire outer surface of the airship hull is comprised of numerous rigid honeycomb sandwich panels of aluminum and carbon fibre. These panels are a uniform size and shape and are laid up in a geodesic construction, giving the airship a faceted appearance.


Instead ot the traditional gondola, the bottom of the Turtle airship has three separate elongated hulls in a trimaran configuration. A main, or central, hull extends the full length of the airship from bow to stern, with two shorter "outrigger' hulls. In larger models of the airships, the two outrigger hulls contain living quarters for passengers.
Engines and motors are embedded within the central hull and horizontal planes. Air inlets for the engines and motors are located underneath the airships' hull. Thrust from engines is directed through plenums to the stern of the airship, and through the top and bottom of the airship.


The top half of the airships' hull is covered with thin film photovoltaic materials.


Two lighter-than-air gasses are used to supply lift; these are contained within rigid walled compartments within the major portion of the airships' hull.

Manned airships provide sufficient room for comfortable crews quarters, with full kitchen and bath facilities. Waste is collected and incinerated board the airship.

The Turtle airship uses dual propulsion systems; electric and diesel
The top of the airships' hull is covered with thin film photovoltaic solar cells which supply electricity to batteries; these battries in turn are used to power electric motors and propellors. Thrust can be directed directly perpendicular to the line of flight, or straight up or down as needed. Amounts of thrust, and directions needed for thrust to be diverted are determined by computers tied to sensors located throughout the body of the airship which measure changes in forces caused by varying winds. This system provides a dynamic, constantly attenuated control and allows the Turtle airship to maintain absolute level and stable flight through unstable air currents. These same systems are used to effect for landing the airship or take off; thrust being diverted straight up or down as needed.
These systems give the Turtle airship unparalleled maneuverability; the airship can hover, move directly from side to side, or spin horizontaly on its' own axis. The primary propulsion is derived from biofueled jets. This makes the airships reach speeds of up to 200 mph.
Solar Power is used for long endurance flights as needed during sightseeing cruise flight.
from the propellers located within the horizontal planes is used together with the main thrust
The materials used in the Turtle airships' hull are durable enough to leave outside in all weather conditions; the Turtle airship does not need a hangar. The Turtle airship does not tie up to a mooring mast, and needs no ground crew to assist in take-off or landings.


NORMAL FLIGHT OPERATIONS:
The Turtle airship is a totaly VTOL craft; it does not bank in turns, and maintains a level attitude during all parts of flight, including take-off and landing.
Helium is not vented.
Water ballast can be regained or obtained during flight directly from ambient air by using water condensation units.
Flying on solar power alone, the airship has no range limitations.
In large airships, enough solar cells are available to produce excess electricity; this can be used to split water into its' oxygen and hydrogen components; these gasses can the be fed directly to burn as fuel if desired.


WATER OPERATIONS:
The airship settles directly onto any suitably sized calm water surface.
Upon landing on the surface of the water, the airship takes on water ballast After taking on ballast, the airship lies in the water as stable as a marine vessel. The airship is then moved and steered and docks at a pier just as a marine vessel
To take off, water ballast is jettisoned, and thrust is directed downwards; the primary engines force air under the airship hull to break surface tension and ease take-off.


LAND OPERATIONS:
The Turtle airship can hover over a landing area for extended periods; or, decend very gradually . This vertical, slow approach is much safer than other airplanes, helicopters, or hybrid airships. The Turtle airship lands directly onto the ground; without ground crew assistance; and, without any need of special mooring masts or other prepared facilities.
Upon landing, the Turtle airship can be held to the surface by the directed thrust, or anchored as desired from outside the craft. preprogrammed toinclude perform multiple landings and take offs as desired, without ground crew attendance.
Reduntant computers and sensors systems monitor and control all aspects of flight, measuring thrust, bouyancy, ambient and internal temperatures, gas volumes, ballasting, electric power and fuel reserves, altitude above ground level, and payload weights. Radar and computers select optimum flight paths through all weather conditions.
Turtle airship mooring systems that are automaticly engaged upon landing either in water or on ground, are locked until directed by a pilot.


No mooring masts or other recovery and/or docking facilities are needed by a Turtle airship. No hangers are needed.
Contact:

turtleairships@hotmail.com

Monday, June 8, 2009

Weather and Maneuverabilty

WEATHER: past blimps and zeppelins have all been constructed out of flimsy materials such

as doped canvas, and rubberized or plastic coated synthetic fabrics. All are susceptible to tearing, and all degrade in ultraviolet light. This has resulted in craft that had little structural strength to begin with, and lessened the more they were flown.

Even though these could fly in virtually any kind of weather, they are not. The difficulty is not the wind, rain, snow, fog or what have you; the difficulty is the ground handling. Because these past airships are so flimsy and cumbersome, landing or taking off while being hauled about by a ground crew, or docking at a mooring mast, or moving in and out of a protecting hangar, becomes a nightmare as the airships are tossed about in varying air currents.

Historic losses of large airships were generally due to flight in extremes of weather; ie: thunderstorms. In the early years of lighter-than-air aviation, there were no modern weather prediction methods such as radar or satellites; and airships were flown in hazardous conditions, often by sight alone. Upon encountering severe weather, an airship (then) could not move quickly enough to avoid it if need be, nor aware in most cases that weather conditions were to severe for the structural integrity of the airship.

HOW TO SOLVE THIS PROBLEM:

(1) Construct airships of aluminum and carbon fiber. These materials are light enough to replace historic materials, yet they can be made extremely strong and weatherproof. They do not degrade in ultraviolet light.
(2) Cease docking airships at mooring masts and using ground crews for assistance in landing or take off. Instead, design airships to land directly onto the surface, land or water. This necessitates a change from the "rounded belly" shape of all past airships. It is an easy and common sense solution.
(3) Cease placing airships inside of hangars. Building airships out of sturdy weatherproof materials enables this change; just as a lightweight geodesic dome is used as a primary building.

MANEUVERABILITY: Past blimps and zeppelin type airships only have rudders/elevators at the stern of the craft; whilst engine thrust has been placed far in front of those to the center of the airships' hulls. This makes them extremely cumbersome to steer, much like a sailboat. The only steerage available is at speed; when the airship slows down to land or take off, it cannot readily be steered or controled. This is one reason why ALL past airships have needed to be literaly "man handled" into position by large ground crews.

Flight characteristics of past airships have been adversely effected by this rudder/power arrangement as well. Because of the long lag time between rudder or elevator commands and actions of the airships; they tend to "porpoise" in flight, or swerve off course repeatedly.

Because all past airships have been constructed of flimsy materials, they have been unable to use heavier, more powerful engines that might be employed to reduce the buffeting or force of winds in poor weather conditions.

HOW TO SOLVE THESE PROBLEMS:

(1) By constructing airships of strong materials, they can be made larger and carry much more powerful engines; even jet engines. This will enable them to avoid, or reduce the effects of varying winds and poor weather conditions.
(2) Building rigid airships with interior framing allows engines to be placed away from the center bottom location as in the past. This can permit thrust to be directed to ANY direction; thereby making the airship much more stable and able to counter variable air currents.
(3) Constructing airships out of very strong materials, and proper design of framing members, allows the airships to carry multiple engines, some dedicated to primary propulsion, some dedicated to maneuver.
(4) Use of directed thrust, and placing elevators forward on the airship as well as at the stern allows for more control in flight.

Q: How would they fly safely in any weather?
A: Turtle airships use multiple engines, all of which can direct thrust to any direction. Sensors placed throughout the airship measure forces brought about by varying air currents many times each second; and computers then determine where to apply compensating thrust in order to maintain stability during flight. Of course, the Turtle airships' hull is strong enough to allow it to withstand poor weather conditions. First rule of airship flight....simply avoid bad weather. Airships can do so because they do not have to fly in a straight line from point A to point B in order to conserve fuel, as do airplanes.

(sigh..and here we GO...)

No blimps, no blimps, no blimps, NO blimps, NO BLIMPS, NO!

No mooring masts.
No slow, big fat bags of helium
No ground crews handling line lines to land or take off.
No giant hangars.
No Blimps, (or zeppelin-like similar craft)

Aw, hells bells people.....
NO BLOODY BLOOMIN BLIMPS!